Rotary die storage - Motorised lift

Rotary die storage



This type of storage is an ideal solution when you need a small storage, since the motorised lift requires more floor space in-between the racks  compared to a crane, and has a maximum lifting height of 3,500 mm for safety reasons. The storage consists of a robust and highly customisable rack system that holds your rotary dies of various sizes. It ensures safe, simple and efficient storage and handling of the rotary die sets. Specifically, the rotary dies’ knives and rubber are protected during storage and transport. In addition, the storage uses a motorised lift to efficiently handle and transport rotary die sets between storage and production. Lastly, it can handle both rotary and flat bed die sets, if you choose a motorised lift with a detachable gripper. On this basis, you can get a combined flat bed and rotary die storage.


Safe handling of cutting dies

Both operators and cutting dies are protected.

Compatible with rotary and flat bed dies

Easy to detach the rotary die gripper.

Small and centrally located storage

Store your most commonly used cutting dies near the production area.

Easy positioning of cutting dies

Sideshift adjustment for efficient handling.

Features and benefits

All rotary die storages

  • Modular storage for rotary dies.
  • Easy to extend the storage for future needs.
  • Extend the lifespan of your rotary dies.
  • Avoid downtime by keeping your rotary dies protected.
  • Increase production efficiency.
  • Easy access to all rotary dies.
  • Minimise maintenance costs.
  • Increase health and safety standards - avoid heavy lifting.
  • Safe and easy handling of rotary dies.
  • Increase storage capacity without using additional square meters.
  • User-friendly handling and easy to teach new operators.

The storage with motorised lift

  • Capable of having up to 4-meter-tall racks.
  • Easy to switch from rotary to flat bed die handling, if you choose a motorised lift with a detachable gripper.
  • Transport your cutting dies directly to the production without the use of transport trolleys.
  • Standard battery charger: 230 V and 50 Hz. Other battery chargers are available on request.
  • Storage floor must be in good condition and kept clean for safety reasons and ideal handling of cutting dies.
  • Possible to store both flexo stereos, flat bed and rotary dies in the same storage.

Complementary products

If you are interested in a rotary die storage, you might also be interested in the following products.

Transport trolleys

Mezzanine elevator

Steel sheet cladding


Information needed to make a quote

Please specify the height, width and length of the area in the factory, where you want to locate the storage.  

Please specify if there are any objects on the floor or hanging from the walls and ceiling such as doors, machines, lights and ventilation systems that we need to take into account. 

Please specify the number of rotary dies that need to be stored and their dimensions or the machine’s name.  

Please specify if we need to take any external factors into account such as the type of earthquake certification. 

Please specify if you need any of our complementary products. 

Need more information?

Please contact us to get more knowledge about how we can construct the optimal storage for your factory. 

By continuing to use the website, you accept the privacy and cookies policy. More information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.